Ceiling mount microwave occupancy sensor (SR-ZG9030A-MW)¶

This documentation was generated from: SR-ZG9030A-MW.json

Attribute	Value
status	Gold
product	Ceiling mount microwave occupancy sensor (SR-ZG9030A-MW)
modelid	HK-DIM
manufacturername	Sunricher

1. Dimmable light¶

Endpoint: /lights

Attribute	Datatype	Description	Access
lastannounced	ISO 8601 timestamp	Timestamp of the last power-cyle or rejoin.	R
lastseen	ISO 8601 timestamp	Timestamp of the last communication.	R
manufacturername	String	"Sunricher"	R
modelid	String	"HK-DIM"	R
name	String	Name of the resource.	RW
swversion	String	Firmware version of the device.	R
type	String	"Dimmable light"	R
uniqueid	String	Unique identifier of the resource.	R

Attribute	Datatype	Description	Access
alert	String	The currently active alert effect. Default: none "none" — light is not performing an alert "select" — light is blinking a short time "lselect" — light is blinking a longer time	RW
bri	UInt8	The current brightness.	RW
on	Bool	True when device is on; false when off.	RW
reachable	Bool	When true the device is assumed to be operational.	R

Endpoint: /sensors

Attribute	Datatype	Description	Access
lastannounced	ISO 8601 timestamp	Timestamp of the last power-cyle or rejoin.	R
lastseen	ISO 8601 timestamp	Timestamp of the last communication.	R
manufacturername	String	"Sunricher"	R
modelid	String	"HK-DIM"	R
name	String	Name of the resource.	RW
swversion	String	Firmware version of the device.	R
type	String	"ZHAPresence"	R
uniqueid	String	Unique identifier of the resource.	R
swversion	String	Firmware version of the device.	R
type	String	"ZHAPresence"	R
uniqueid	String	Unique identifier of the resource.	R

Attribute	Datatype	Description	Access
delay	UInt16	The occupied to unoccupied delay in seconds. Default: 0	RW
on	Bool	When true the sensor is enabled in rules. Default: true	RW
pending	Array	Pending tasks to configure the device.	R
reachable	Bool	When true the device is assumed to be operational.	R
sensitivity	UInt8	The sensor sensitivity. Default: 14	RW
sensitivitymax	UInt8	The maximum sensor sensitivity. Default: 15	R

Attribute	Datatype	Description	Access
lastupdated	ISO 8601 timestamp	Timestamp when state was last updated.	R
presence	Bool	True when presence is detected. Default: false	R

Endpoint: /sensors

Attribute	Datatype	Description	Access
lastannounced	ISO 8601 timestamp	Timestamp of the last power-cyle or rejoin.	R
lastseen	ISO 8601 timestamp	Timestamp of the last communication.	R
manufacturername	String	"Sunricher"	R
modelid	String	"HK-DIM"	R
name	String	Name of the resource.	RW
swversion	String	Firmware version of the device.	R
type	String	"ZHALightLevel"	R
uniqueid	String	Unique identifier of the resource.	R
swversion	String	Firmware version of the device.	R
type	String	"ZHALightLevel"	R
uniqueid	String	Unique identifier of the resource.	R

Attribute	Datatype	Description	Access
on	Bool	When true the sensor is enabled in rules. Default: true	RW
reachable	Bool	When true the device is assumed to be operational.	R
tholddark	UInt16	Specifies at which `lightlevel` the `dark` attribute turns false. Default: 12000	RW
tholdoffset	UInt16	Relative offset to `tholddark`. Sets `daylight` attribute to true when when lightlevel is at or above (tholddark + tholdoffset). Default: 7000	RW

Attribute	Datatype	Description	Access
dark	Bool	True when `lightlevel` is lower than `tholddark`. Default: false	R
daylight	Bool	True when `lightlevel` suits daylight according `tholddark` and `tholdoffset` configuration. Default: false	R
lastupdated	ISO 8601 timestamp	Timestamp when state was last updated.	R
lightlevel	UInt16	The current Light level in 10000 log10 (lux) + 1. Default: 0	R
lux	UInt32	The current Light level in lux. Default: 0	R