TRÅDFRI bulb E27 CWS opal 600lm

This documentation was generated from: e27_cws_opal_600lm_light.json

AttributeValue
status Bronze
product TRÅDFRI bulb E27 CWS opal 600lm
modelid TRADFRI bulb E27 CWS opal 600lm
manufacturername IKEA of Sweden

1. Color light

Endpoint: /lights

Top level attributes

AttributeDatatypeDescriptionAccess
id String Identifier of the resource, unique within an endpoint. R
lastannounced ISO 8601 timestamp Timestamp of the last power-cyle or rejoin. R
lastseen ISO 8601 timestamp Timestamp of the last communication. R
manufacturername String "IKEA of Sweden" R
modelid String "TRADFRI bulb E27 CWS opal 600lm" R
name String Name of the resource. RW
swversion String Firmware version of the device. R
type String "Color light" R
uniqueid String Unique identifier of the resource. R

Config attributes

AttributeDatatypeDescriptionAccess
colorcapabilities UInt16 The supported color modes as bitmap. R
ctmin UInt16 Minimum supported color temperature. R
ctmax UInt16 Maximum supported color temperature. R

State attributes

AttributeDatatypeDescriptionAccess
on Bool True when device is on; false when off. RW
bri UInt8 The current brightness. RW
x UInt16 The current color x coordinate. RW
y UInt16 The current color y coordinate. RW
reachable Bool When true the device is assumed to be operational. R
colormode String The currently active color mode.

Default: xy

  • "xy" — CIE xy color space coordinates
R
alert String The currently active alert effect.

Default: none

  • "none" — light is not performing an alert
  • "select" — light is blinking a short time
  • "lselect" — light is blinking a longer time
RW

Example output

{
  "colorcapabilities": 0,
  "etag": "08e72d5b3b4d09ea6eee75f92d85993f",
  "hascolor": true,
  "lastannounced": null,
  "lastseen": "2021-03-28T16:01Z",
  "manufacturername": "IKEA of Sweden",
  "modelid": "TRADFRI bulb E27 CWS opal 600lm",
  "name": "Color light 2",
  "state": {
    "alert": "none",
    "bri": 0,
    "colormode": "hs",
    "effect": "none",
    "hue": 0,
    "on": false,
    "reachable": true,
    "sat": 0,
    "xy": [
      0,
      0
    ]
  }
}

Known Issues

Radio Silence

All mains powered IKEA lights and repeaters have a bug that causes the device to not operate correctly anymore. The bug is triggered mostly in larger networks with many end-devices likely after receiving a Parent Announce message a few times.

Workaround: To get the device back online it must be power-cycled. Which means cut the power for a few seconds. After that the device should work normally again.