Ally radiator thermostat (014G2461)¶
This documentation was generated from: etrv0100_thermostat.json
| Attribute | Value |
|---|---|
| status | Gold |
| product | Ally radiator thermostat (014G2461) |
| modelid | eTRV0100 eTRV0103 eT093WRO eT093WRG TRV001 TRV003 |
| manufacturername | Danfoss Danfoss D5X84YU D5X84YU Danfoss Danfoss |
1. ZHAThermostat¶
Endpoint: /sensors
Top level attributes¶
| Attribute | Datatype | Description | Access |
|---|---|---|---|
| lastannounced | ISO 8601 timestamp | Timestamp of the last power-cyle or rejoin. | R |
| lastseen | ISO 8601 timestamp | Timestamp of the last communication. | R |
| manufacturername | String | "Danfoss" "Danfoss" "D5X84YU" "D5X84YU" "Danfoss" "Danfoss" |
R |
| modelid | String | "eTRV0100" "eTRV0103" "eT093WRO" "eT093WRG" "TRV001" "TRV003" |
R |
| name | String | Name of the resource. | RW |
| swversion | String | Firmware version of the device. | R |
| type | String | "ZHAThermostat" | R |
| uniqueid | String | Unique identifier of the resource. | R |
Config attributes¶
| Attribute | Datatype | Description | Access |
|---|---|---|---|
| battery | UInt8 | The current device battery level in 0–100 %. Default: 0 |
R |
| displayflipped | Bool | Displayed content is normal or upside down. Default: false |
RW |
| externalsensortemp | Int16 | The temperature measured by an external sensor, can be used for regulation or displayed on screen. Default: -8000
|
RW |
| externalwindowopen | Bool | The window state detected by an external sensor. Default: false |
RW |
| heatsetpoint | Int16 | Target temperature of a thermostat. Default: 0 |
RW |
| loadbalancing | Bool | Thermostat runs stand alone (false) or shares load with others in the same room (true). Default: false |
RW |
| locked | Bool | Locks or unlocks the device. This item has to be understood as child-lock. Default: false |
RW |
| mode | String | Mode of the device. Default: heat |
RW |
| mountingmode | Bool | Determines if the device has entered the mounting state. Default: false |
RW |
| offset | Int16 | Relative offset to the main measured value. Default: 0 |
RW |
| on | Bool | When true the sensor is enabled in rules. Default: true |
RW |
| radiatorcovered | Bool | Radiator is standing freely (false) or is covered (true). Set this to true for Danfoss Ally to use external temp sensor. Default: false |
RW |
| reachable | Bool | When true the device is assumed to be operational. | R |
| schedule | String | On-device heating schedules. | RW |
| schedule_on | Bool | Determines if on-device schedules for setting the heatsetpoint are currently used or if the thermostat is operated manually. Default: false |
RW |
| windowopendetectionenabled | Bool | Turns the window open detection feature on or off. Default: true |
RW |
State attributes¶
| Attribute | Datatype | Description | Access |
|---|---|---|---|
| errorcode | String | The error code given by the device. | R |
| lastupdated | ISO 8601 timestamp | Timestamp when state was last updated. | R |
| mountingmodeactive | Bool | The current mounting mode state. Default: false |
R |
| on | Bool | True when device is on; false when off. | RW |
| temperature | Int16 | The current temperature in °C × 100. Default: 0 |
R |
| valve | UInt8 | The open percentage of the thermostat valve. Default: 0 |
R |
| windowopen | String | The current window state detected by the thermostat. Default: Quarantine
|
R |
2. ZHATime¶
Endpoint: /sensors
Top level attributes¶
| Attribute | Datatype | Description | Access |
|---|---|---|---|
| lastannounced | ISO 8601 timestamp | Timestamp of the last power-cyle or rejoin. | R |
| lastseen | ISO 8601 timestamp | Timestamp of the last communication. | R |
| manufacturername | String | "Danfoss" "Danfoss" "D5X84YU" "D5X84YU" "Danfoss" "Danfoss" |
R |
| modelid | String | "eTRV0100" "eTRV0103" "eT093WRO" "eT093WRG" "TRV001" "TRV003" |
R |
| name | String | Name of the resource. | RW |
| swversion | String | Firmware version of the device. | R |
| type | String | "ZHATime" | R |
| uniqueid | String | Unique identifier of the resource. | R |
Config attributes¶
| Attribute | Datatype | Description | Access |
|---|---|---|---|
| battery | UInt8 | The current device battery level in 0–100 %. Default: 0 |
R |
| on | Bool | When true the sensor is enabled in rules. Default: true |
RW |
| reachable | Bool | When true the device is assumed to be operational. | R |
State attributes¶
| Attribute | Datatype | Description | Access |
|---|---|---|---|
| lastset | ISO 8601 timestamp | Timestamp when the time attribute was last set on the device. | R |
| lastupdated | ISO 8601 timestamp | Timestamp when state was last updated. | R |
| localtime | ISO 8601 timestamp | The current local time set on the device. | R |
| utc | ISO 8601 timestamp | Current timestamp in UTC set on the device. | RW |